SD70 Description

Introduction

SD70 – All-in-one screwdriving solution. Inserts up to 6 screws in less than a minute, even in narrow

and hard-to-reach spaces.

The SD70 is a brushless screwdriver system designed for use with collaborative robots for safe, easy-

to-use, and consistent screw assembly for screws requiring up to 7 Nm of tightening torque.

The SD70 has several build-in features which enhance robot integration

and support collaborative work environments.

The SD70 is made for pick & place screwdriving applications. This means that screws are picked up

from an automatic screw feeder positioned within the reach of the robot and screwed in at

programmed insertion points.

SAFETY SHIELD

The safety shield covers the bit and screw when on the move, thereby protecting the operator from

rotating and sharp elements. If the tool unexpectedly runs into an object, a safety sensor stops the

robot immediately. The built-in safety sensor is a performance level-d, making safe implementation

easy.

EASY ROUTE PROGRAMMING

The supplied teach pen helps the user to set up the exact position of the screw insertion points.

When the free-drive button is pressed the tool can be moved to the next position. Use the

configurable button to save waypoints, start the screwdriver and more.

COUNTER-BORE HOLES AND HARD TO REACH SPACES

Screws can be inserted in counter-bore holes with up to 15 mm depth from the surface.

Take a look at our data sheet for the SD70 solution below: