Updating spinbridge

This is a step by step guide to updating your Spin Bridge

1. Plug the Spin Bridge in to power.
2. unplug any eathernet cable in the 2. Robot port.
3. Plug the Spin Bridge in to an external network with internet acces (aka a wired internet connection) using the 1.Ext. network port.
4. No tool needs to be connected
5. Picture:
6. connect a labtop to the wifi hotspot "SpinBridge-xxxx" as normal and navigate to the spin interface (10.42.0.1/)
7. In the spin interface navigate to setting/updates and click the "update spin bridge" button.(the page may look different depending on version, but the button is always the same)
8. Picture:
9. You will see this page:
10. The box is now updating if you have connected it to internet correctly, wait 15-20 min and reload the page(you may need to clear any cached version of the interface, on most browsers this can be done with ctrl+f5)